Send inquiry
Product Description
Diamond wire for squaring and blocks cutting
Diamond wire is common used in most factory now, since there are many advantages:
l There is not much block size limited for wire sawing compare with disk saw.
l The wire saw inter-space is thinner and more precise than the large disk saw (deviation < 1 mm)
l Wire saw cutting is more effective and relatively cheaper in long term working.
l By virtue of its greater and greater reliability, wire sawing technology is more and more automated and thus becomes just as productive as competing techniques.
l Noise nuisance generated by diamond wire sawing is significantly less than that produced by other sawing techniques.
Skystone Service:
Diamond wire for squaring and blocks cutting
Diamond wire is common used in most factory now, since there are many advantages:
l There is not much block size limited for wire sawing compare with disk saw.
l The wire saw inter-space is thinner and more precise than the large disk saw (deviation < 1 mm)
l Wire saw cutting is more effective and relatively cheaper in long term working.
l By virtue of its greater and greater reliability, wire sawing technology is more and more automated and thus becomes just as productive as competing techniques.
l Noise nuisance generated by diamond wire sawing is significantly less than that produced by other sawing techniques.
Wires for marble block dressing | |||||||
Model | Diameter(mm) | Fixing | Beads/m | Material | Sawing speed (mm/min) |
Life time (m2/m) |
Line speed (m/s) |
MCP10 | 10 | plastic | 32 | soft marble medium hard marble hard marble mixed marble |
20-40 15-30 20-20 15-40 |
30-70 20-50 15-30 20-40 |
30-40 30-40 26-35 30-40 |
MCP10.5 | 10.5 | plastic | 32 | ||||
MCP11 | 11 | plastic | 32 | ||||
EMCP11 | 11 | rubber | 32 | ||||
Wires for granite block dressing | |||||||
Model | Diameter(mm) | Fixing | Beads/m | Material | Sawing speed (mm/min) |
Life time (m2/m) |
Line speed (m/s) |
GCP11.4 | 11.4 | plastic | 40 | soft granite medium hard granite hard granite |
12-20 8-15 6-10 |
12-20 10-15 7-10 |
28-30 28-30 26-30 |
GCR11.4 | 11.4 | rubber | 40 | ||||
GCP11 | 11 | plastic | 37/40 | ||||
GCR11 | 11 | rubber | 40 | ||||
GCP10.5 | 10.5 | plastic | 37 |
Skystone Service: